|
| BCM Modules |
 |
 |
Nortel Digital Station MBM (32+)
Nortel DSM 32 +Connects up to 32 telephones and analog devices. All Station Media Bay Modules are site pluggable in the BCM unit.
Features:
- Faceplate has two LED's
- Power (indicates operating status)
- Status (indicates hardware status)
Please Call us at 905-884-TECH (8324) or Email us for a Quote! |
Nortel Digital Station MBM (16+ port)
Connects up to 16 telephones and analog devices. All Station Media Bay Modules are site pluggable in the BCM unit.
Features:
- Faceplate has two LED's
- Power (indicates operating status)
- Status (indicates hardware status)
Please Call us at 905-884-TECH (8324) or Email us for a Quote! | |
|
Nortel Digital Trunk MBM (PRI / T1)
BCM Digital trunk module that connects a T-1 or PRI trunk to the BCM system up to 23 digital telephone lines. A maximum of three BCM-DTM modules can be installed on the BCM system.
Features:
- The faceplate of the BCM-DTM has LED's that indicate power status and any ongoing test that the module is undergoing.
- The faceplate has a RJ-48C connector that connects to the BCM-DTM.
Please Call us at 905-884-TECH (8324) or Email us for a Quote! |
Nortel 4x16 LS/DS / CO ID Combo CardCombo card provides 4 CID CO ports and 16 Digital station ports. Module works with BCM 200 and 400.
| |
|
Nortel Meridian Customer Defined Networking Software for BCM (MCDN)
Meridian Customer Defined Networking (MCDN) is a Nortel Networks proprietary ISDN-PRI signaling protocol used to interface a BCM to another BCM, a Meridian 1 system or a Norstar system. MCDN is used to network voice-switching capabilities only and, on the BCM provides networking features such as Calling Party Name Display, Network Messaging Services and 182 Message Waiting Indication. (Additional networking features are supported between Meridian 1 systems.)
|
Nortel BCM 8 Analog Station Module (ASM 8) | |
The Analog Station Module (ASM) provides connectivity to eight analog stations. Analog support includes terminals,fax machines and modems up to a 28.8 speed.The BCM ASM 8 has two LED's on the face plate.
Features:
Power(indicates working status)
Status(indicates hardware status)
Please Call us at 905-884-TECH (8324) or Email us for a Quote! | |
|
Nortel LS/DS ID 8 Port CO Card (CTM 8) | | The BCM-CTM 8 connects up to eight analog CLID PSTN lines to the BCM system. Two auxiliary ports permit the connection of a 33.6+ Kbps modem, fax machine or single line analog telephone to line 1 or 5. When the auxiliary device is using line 1 or 5, the BCM system does not allow other telephones to use line 1 or 5. When a single line analog telephone is connected to the auxiliary port, it can be used as an emergency telephone.
Features:
- The front faceplate of the BCM-CTM has eight RJ-11 connectors
- The BCM-CTM faceplate also has two LEDs
- Power (indicates operating status)
- Status (indicates hardware status)
Please Call us at 905-884-TECH (8324) or Email us for a Quote! |
Nortel BCM Fiber Expansion
Fiber Expansion Media Bay Modules connect Norstar Fiber Station and Trunk modules to the BCM system. One Fiber Expansion Module is available for the BCM system. The BCM-FEM connects up to six Norstar Fiber Station or Trunk modules to the BCM system.
In new installations, where Direct Inward Dialing (DID), or tie-lines, cannot be provisioned over a T-1 or PRI, the BCM-FEM can be used to support Norstar Analog DID or Analog E&M trunk cartridges to satisfy this requirement.
Features:
- The front faceplate of the BCM-FEM has six connectors that connect the BCM-FEM to the expansion modules,/li>
- On the right side of each connector, there is an LED that indicates if the fiber port is enabled,/li>
- If the LED is on, the fiber port is enabled and it can be used to connect a Fiber Station or Trunk module
- The BCM-FEM has two LEDs on the faceplate
- Power (indicates working status)
- Status (indicates hardware status)
Please Call us at 905-884-TECH (8324) or Email us for a Quote! | |
|
|
